• Length: 32"
• Hickory Wood Handle
• Head: 6lb

36” Fire Axe with Pick Head

36” Fire Axe with Pick Head constructed with the highest-grade materials and workmanship providing firefighters everywhere with a long lasting, durable, maintenance free tool they can count on.

• Length: 36"
• Hickory Wood Handle
• Head Weight: 6lb

Durable fiberglass handle sledgehammer, a great tool for breaching walls and forcing open doors. 

• Length: 32"
• Fiberglass Handle
• Head Weight:12lb

Also known as the "Denver Tool". The TNT Tool is an extremely durable multi-purpose tool, aiding firefighters and law enforcement officers worldwide. The TNT tool gives you the use of 5 tools in one: an axe, sledge hammer, pry tool, ram, and a short D-Handle pike pole. Made in the US, Cast with high carbon heat treated steel and finished with a baked on powder paint coat and a solid fiberglass handle.

• Length: 35"
• Fiberglass Handle
• Head Weight: 6lb
• Total Weight: 11.51lb

Due to the new & stronger doors and locks used in construction of new buildings, forcible entry has become an increasingly longer and harder task to perform. The K-Tool and the "Thru the Lock" method of forcible entry provide a modern approach to this problem.

The complete K-Tool unit includes:

• K-Tool
• Set of Key Tools
• Leather Pouch
• Operation Manual
• Shove Knife

Husqvarna has recently acquired the Partner name and continues to produce the Partner K950 Rescue Saw that you have come to know and trust under the Husqvarna name.

Husqvarna K950 Rescue Cutter delivers more power for every ounce of its weight than any other cutter on the market.  Despite its high engine horsepower, it is an absolute cinch to start, thanks to Easy Start. The Active system makes it ideal for rescue work, because the entire filter system is well protected from water inside the tool cowling.

Technical Data:

• Air cooled two cycle engine
• 94cc
• 6.1 horse power
• Weighs 22lb without blade
• Holds 1 liter of fuel
• Smart carburetor, which prevents the saw from stalling out during extreme use

Developed more than a decade ago, D'AX^TM High Speed Carbide Blades were originally engineered in conjunction with the Fire & Rescue Service.

The Challenge - to design one blade that would replace the combination of both Carbide Tipped Blades for cutting wood and Abrasive Blades for cutting sheet metal.

The Goal - to eliminate the tip breakage and tip repairs required with traditional carbide tipped blades and to eliminate the need to change blades based on the material being cut.

The Result - D'AX^TM High Speed Carbide Available in 12” and 14”
Blades can cut through a wide variety of building materials including:

D'AX^TM offers the ability to use one machine and one blade to enter, ventilate and extricate without time consuming blade & tool changes and costly tip repairs.

D'AX^TM is ideal for:

•    Flat Roof Ventilation
•    Residential Roof Ventilation
•    Forcible Entry
•    Aircraft Extrication
•    Automobile Extraction
•    Marine Extrication 

Every kit includes an Ajax Kwik Change Retainer. This retainer was originally developed by Ajax to hold the cutting tool securely in place, yet allowing you to change tools in a matter of seconds during emergency procedures. In addition, the retainer also allows the use of Ajax Exclusive non-turn tools. These tools can be indexed into different positions to allow one-hand operation of the hammer when necessary. The Ajax Kwik Change Retainer is the only retainer which lets you use both turn and non-turn type tools.

A 600 blow per minute, 7 pound pneumatic impact tool. Combining ease of handling, very low air consumption and high power output, it is an ideal tool for rescue work.  Vehicle crash sites, metal clad buildings, aircraft penetration, exhaust ducts and composite structural material are typical barriers often faced by rescue personnel. The Airgun 40, using one of several specially designed tool bits, should be your tool of choice when faced by these situations. The Airgun 40 is also an ideal confined space tool.

A 400 blow per minute, 11 pound pneumatic impact tool that dramatically increases the range of forcible entry and rescue work initial responding units can handle without calling up heavy equipment. The Pakhammer is the only pneumatic impact tool of its size that is designed to operate from portable air cylinders. It is an ideal tool for bus and train rescue, high rise work, collapse rescue or any situation that requires a powerful impact tool that operates from a limited air supply.

For more than 35 years, the Paratech Hooligan Tool has set the standard for Halligan-type tools. The Hooligan is designed to pry, pound, puncture, twist, remove and cut open all types of barriers.

The Pry Axe is a lightweight, multi-purpose, slam and ram tool designed to pry, enlarge openings, cut sheet metal and twist off locks and latches. This efficient tool lets every firefighter force entry, rescue and ventilate without waiting for help. The Pry Axe is small enough to carry and rugged enough for most jobs.

The ergonomically designed fiberglass core handle is 19 1/2 inches, with a curved polypropylene jacket. The head to handle assembly uses a reverse tapered eyehole secured with an exclusive proprietary epoxy system. The handle withstands over 10,000 lbs. of force. The TRUCKMAN AXE weighs less than 3 lbs. and is center balanced like a framing hammer. Because of its design, the Truckman does the work for you.

The TNT Rescue Hydraulic Door Opener is the perfect tool in any forcible tool arsenal.   Open doors easily, reducing time and energy when searching multi room buildings.

• Operating Pressure: 10,500psi /724 bar
• Max. Spread Force: 10,000 lbs / 44.5 kN
• Stroke: 5 in./127 mm
• Superior design reduces pinch points
• Available in Tactical Black

TNT Hydraulic Rams have penetrating teeth on both ram tip and base with the ability to plunge through plastic and other materials for better grip strength, thereby, providing greater control and increasing safety during displacement of various structures. Maximum push force in excess of 33,000 pounds makes these rams ideal for heavy equipment and machinery. Hydraulic Rams range in size from 20 to 60 inches long.