| A.J. Stone Co. Ltd. has been selling bunker gear to large fire departments for the past 18 years. In 2007, a strategic review of our vendors led us to make a vendor change and welcome the quality and innovation of INNOTEX, a true Canadian manufacturer. Now several hundred bunker suits into our relationship, we are very pleased with the quality and workmanship sewn into every suit. To date, we have had nothing but positive feedback from firefighters related to the comfort and features of the INNOTEX gear. Because Fire Departments have different needs, Innotex has developed two garment designs from which you can select a wide range of options. Both designs are available in Custom and Stock Gear models.
|     |
| | | Standard Features and Benefits Built into all Innotex Bunker Suits | | | | | | | | Innotex's pre-formed sleeves provide the wearer greater mobility and comfort, while performing emergency scene tasks. | Innotex's under arm gussets minimize rise of the coat when the wearers arm is in an upward position. | INNO500 BR1 Collar is a unique six-layer collar designed for safety and superior protection.With this unique patented collar system, there are no snaps, hook & loops or zippers rubbing against your neckline creating discomfort. | 
| | | | One piece "L" shape storm flap. | High density bar tacks on all stress points. | Double locked stitch reflective trim for increased durability, four rows on every trim. | | | | | |
Wristlet Water Evacuation System - Shallow water well with drain eyelets reducing water entrapment and risk of burn injuries on forearm.
| 
| | | | | Pre-formed legs. Multiple panel construction for ease of movement and comfort. Articulated knees, improve flexibility. | Double fly protection: six layers of protection for the wearer. Three layers on the interior portion and three layers on the exterior portion. | Arched leg cuff. One inch arch cut from side to side at the back of each pant leg. This design prevents damage due to dragging on floors, and prevents the pant cuff from catching on the boot heel. | |
Cuff fabric reinforcement is rolled on itself to create a smooth edge in order to prevent premature wear and tear.
|
| | |
| | | Innotex X-Gear (INNO5000X and INNO600X) Coat Special Features | | | | • Enhanced Mobility • Extended Reach • Improved Flexibility • Ultimate Comfort • Light Weight Design | | | 
 | | | | | FMATM: Forward Motion
Arm system (minimizes
restrictions of arm
movements and coat rise).
Semi set-in sleeve. | | Angled semi below pocket
with center pleat
(6.5"x10"). Back of pocket
deeper than the front as
bottom of pocket follows
cut of coat hem. | | | | | | | | | | Coat shorter in the front
reducing bulk and
increasing ease of forward
bending movement. | | Coat longer in the back for
added coverage when
bending forward. |
For further information regarding INNOTEX please contact A.J. Stone Company Ltd. or your Local Sales Representative.
|
Bunker Gear
