Performance Advantage Company manufactures proper, safe, and efficient tool mounting.

Performance Advantage Company offers:

Security - NFPA 1901 Compliant Products

Organization - Proper and flexible tool placement and mounting

Accessibility - Having the right tool immediately available can save lives when seconds count.

Reliability - Proven dependable service - for years - in busy fire departments internationally as well as many military installations. Remember, your satisfaction with PAC and our products is our number one priority

HOOKLOK

HOOKLOKS (sold in pairs) are clamp-action mounting brackets that depend on automatic clamping force and friction to restrain tools. Grip range 1" to 1-1/4" (25.40 - 31.75 mm).

FLEXMOUNTS are flexible Y-shaped mounting brackets designed to provide a secure, grip-type mount for poles, nozzles, tools and other equipment. Grip range 1-3/4” to 2-1/2” (44.45 to 63.50 mm).

The TOOLOK may be mounted horizontally or vertically. The radiused top end of the base is designed to prevent mounted items from rolling off prior to engaging the GRIPLOK.

The TOOLOK is injection-molded of the best materials available to provide a long, troublefree life. The base is black, rigid and made of SUPER TUFF nylon. The GRIPLOK is yellow and made of a special high performance, urethane-based elastomer.

Tensile strength at break, 5400 PSI. Simple to install and use. TOOLOK is tough, resistant to weather, non-conducting, UV stabilized, and cost-effective. It features easy, fast-locking and instant release. Grip range is from 1/8” to 1-1/2” (3.17 to 38.10 mm).

UNIVERSAL MOUNTS are rugged, right-angle mounts with countless uses. Molded of tough, black urethane, UNIVERSAL MOUNTS can be used in triple under the base of fire extinguishers, or the base of hydraulic power tools.

When used with ADJUSTAMOUNT KIT (P/N K5006), the UNIVERSAL MOUNTS can provide secure mounting for the many hard-to-mount cylindrical units. The ADJUSTAMOUNT KIT (P/N K5006) is NOT INCLUDED with
UNIVERSAL MOUNTS

The EXTENDED ADJUSTAMOUNT is a very versatile mounting package designed to restrain larger objects such as litter baskets, step ladders, etc.

The EXTENDED ADJUSTAMOUNT consists of modules designed to fit 1-5/8” UNISTRUT. High-strength injection-molded LOCK-END and CLAMP-END modules, using UNISTRUT CHANNEL NUTS (furnished) allow quick positioning and easy moving, if later required. A 9” length of extruded neoprene CHANNEL CUSHION provides insulation and a firm bottom grip between the mounted
object and the UNISTRUT. It can be custom-cut to the lengths required. EXTENDED LOCKSTRAP’s usable length is 30” (762.000 mm).

UNISTRUT IS NOT INCLUDED.

• FAST ACTING: You can use it faster than you can describe it.
• EASY TO USE: No moving parts.
• QUIET MOUNT: No metal to metal contact.
• CORROSION: Will not corrode.
• STRONG: Resistant to heat and cold. Can be mounted in any position - even hanging upside down under a shelf.

• RESTRAINS CYLINDER UNDER IMPACT OF 10-G’S IN ANY DIRECTION. MEETS NFPA 1901 IMPACT REQUIREMENTS

• AUTOMATICALLY ADJUSTS TO HOLD EITHER
  A 45-MINUTE CYLINDER OR A 30-MINUTE CYLINDER

ADJUSTAMOUNT KIT includes, not only the versatile
ADJUSTAMOUNT (P/N 1006), but also a 12” length of
1006-1 UNISTRUT, pre-punched for mounting.

EXTENDED ADJUSTAMOUNT KIT includes, not only the heavy duty EXTENDED ADJUSTAMOUNT (P/N 1008), but also a 24” length of 1006-2 UNISTRUT, pre-punched for mounting.

HALLIGAN TOOL MOUNTING KIT for safe, secure, and dependable storage in any position. Molded CLAWEND HOLDER (P/N 2070), DUAL POINT HOLDER (P/N 2071) with TOOLOK (P/N 1003) for vertical or horizontal mounting.